WE HOLD THE PATENT ON THE TRIPLE-TIERED™ TAPERED SPRING. ANY COMPANY CLAIMING THEY OFFER A TRIPLE-TIERED™ SPRING DESIGN IS EITHER IN VIOLATION OF PATENT LAW OR PURPOSELY ATTEMPTING TO DECEIVE YOU. DON’T BE FOOLED!!
David Hall’s NEW TRIPLE-TIERED™ TAPERED SPRING ADJUSTS TO THE WEIGHT OF THE USER AUTOMATICALLY The Easy-Bounce Cellerciser® is not a hard bounce rebounder. Most rebounders use little tube springs that can cause nerve damage, knee problems and lower back pain. When a person alters the angle of their body, this can put them in a very compromised positioned potentially damaging them. The little tube springs generally stretch slightly and come to an abrupt jar at the end of the stretch. The jarring effect can hurt you, like it did my father (covered in “About Dave”) The sudden jar can also break the springs. Dr. Morton Walker, in the Townsend Letter for Doctors, warned physicians to avoid the effects of these rebounders. In 1993 I introduced the jumbo tapered barrel spring. It stretches from the middle and the tapered ends allow the body to accelerate and decelerate smoothly. These unique barrel springs have reignited the benefits of the mini-trampoline. An ever-growing number of medical doctors, chiropractors, massage therapists, Yoga, Tai Chi masters and health practitioners are using and recommending the Cellerciser® to their clients.
The Cellerciser® INTRODUCES the NEW superior quality large fat TRIPLE-TIERED™ TAPERED spring (patented) that allows for a gentle acceleration-deceleration effect. And since they avoid the jarring effect, they don’t break like typical tube springs can. David Hall’s NEW TRIPLE-TIERED™ TAPERED SPRING ADJUSTS TO THE WEIGHT OF THE USER AUTOMATICALLY. A 100 pound person will utilize the center portion of the spring and second tier, a 200 pound person will advance to the second and third tier, and a 300 pound person will use more of the third tier. David Hall designed the spring so that the user has a very smooth acceleration-deceleration affect without too soft or too hard a bounce. When the typical barrel spring is too soft, the person using it doesn’t receive the resistance needed to build up the cell membrane (necessary for strength and health) Stronger cell membranes help avoid the effects of viruses and other foreign invaders. Our spring is made of hi-carbon steel wire with the excellent annealing/temper treated finish. The final stage of annealing/temper treated finish plays a key point. Above all, the TRIPLE-TIERED™ TAPERED spring is produced via the newest micro-computer auto-control machinery. Originally the hi-carbon steel wires destroyed a lot of our moldings. In order to produce the very best spring, we were compelled to use tungsten steel moldings to overcome the problem. The “hi-carbon” steel wire is not on the market so that its minimum producing quantity and longer lead time accounts for a higher cost. But the end result to you is the most beautiful performance available without the breakage other springs have. Our unique design allows the Cellerciser® to further distinguish itself from the typical rebound industry. Note rebounders are a dime a dozen. You can find them in garage sales. There’s only one rebounder that’s called the Cellerciser®. It’s an investment you’ll only need to make once.
Typical rebounders often use a canvas, nylon or plastic mat that can stretch, rot, or mildew. The inferior material, weave and stitching can cause the feet to sink or pronate toward the middle causing ankle problems, knee problems, and lower back problems. In addition the user won’t feel very balanced. When the mat stretches, depending on the angle to which the user lands, it can cause the user to be thrown off. The Mat on the Cellerciser® is manufactured in the United States of a high quality space age material. Each polypropylene fiber is put under nearly 200 tons of pressure and then put through an oil drum bath at over 200 degrees resulting in a texture that feels good under the feet. The fabric will not stretch out and will support the user. The user feels balanced and irrespective of the angle to which they land, the Cellerciser® lifts them straight up, it doesn’t throw them off. This added confidence gives the user more ability to try the different movements taught by David Hall. UV resistant and made in the USA, our mat material is highly resistant to the elements, so you can even leave it outside in the rain, snow or wind. Try that with a typical rebounder!
We use the same special thread and stitching used in the seat belt of your car. The webbing around the mat has 7 rows of stitching on polypropylene webbing.. It will not rot or tear like canvas look-a-likes and is also weather resistant. It’s the best.
The paint on the Cellerciser® has replaced the old powder coating with a superior “electro-plating” finish! That helps the Cellerciser® to be more resistant to weather conditions and chipping. Our finishing plants apply Taiwan-made paints (NOT CHINA) to all products including Cellercisers®. All these paints are from qualified makers for export worldwide and meet European “RoHs” and USA “CPSC” standard.
Our cellerciser frames & legs are electro-plated, NOT powder coating finish. We stress “ELECTRO-PLATING FINISH” and “MADE IN TAIWAN” and the UNITED STATES — NOT “MADE IN CHINA. Don’t be fooled by competitors who work so hard to discredit us. It should be a reflection on the kind of company they are and how good our product really is. We want you to have the best.
We use the super-reinforced lining for the artificial leather to make the rich, supple and durable spring cover.
The rip-stop nylon carry case is similar to parachute material but thicker. It’s strong and water resistant. The unique Cellerciser® folds up and slides into the carry case. It’s completely portable. The Professional Tri-fold fits into a carrying case WITH BUILT-DOLLY (pat.). That makes traveling more convenient!
The Cellerciser® is black. A neutral color, black fits with almost any decor. In addition, black Permatron has a better UV resistance and lasts longer.
ALL STEEL CONSTRUCTION DOESN’T CRACK. (composites have a history of cracking) The springs on typical rebounders are connected directly into the frame, causing the frame to wear away in 36 different points. The Cellerciser® frame is drilled with thirty-six holes through the frame. Special steel pins are then inserted through the frame. The springs are then attached to the pins. Hence, the frame lasts virtually forever. Each spring is folded over the attached area so when the portable Cellerciser® is folded up, the springs stay in place during travel. In addition we don’t hand weld our legs like our competition. Hand welding can cause cold spots where the weld is weaker and thus can break. We use a computerized robotic welding system. Both of our units use steel hinges for strength and portablility. Why do we use steel? Ask the professional gyms. Unfortunately the plastic composites have a history of cracking. Steel lasts.
At 8.5 inches long, our legs are about 2 inches longer than most units, allowing for the improved spring. A six foot person with an eight foot ceiling has plenty of room to bounce. The supporting legs on typical rebounders are screwed on and can loosen, get stripped, stuck or lost through normal use. The Cellerciser® legs are connected over a steel post and held in place by heavy duty piano wire. (The best wire available) The leg lifts up and snaps into place. Even the rubber tips at the end of the legs are not typical rubber, but rather a polymer and much stronger. To date we’ve never worn a rubber tip out. We do not have built in obsolescence in the Cellerciser®. We even include a metal washer inside the rubber tip so that the legs’ ends won’t wear through. Although the Cellerciser® is warranted to 300 pounds we work with many who are over that weight.